Good Day,
i have a 997.2 PDK Carrera S, it had a problem with the displacement sensor so i had it replaced with a T-Design part recently. The gearbox recalibration was complete and now trying to re-program the clutch calibration. it has been over a week now and it always gives an error. "Data Record for Clutch calibration is invalid" also on occasion when you try to initiate the "clutch Teach" it will come up with "Function cannot be performed, threshold not programed or programmed incorrectly"
I have heard that this calibration has to be performed with the engine / gearbox up to temperature, at the moment it seems like it is going over temperature before the calibration is complete, then you have to let the car cool down to re-start the process. which means maybe 2 attempts / day. I live in the caribbean so ambient temps are around 32C every day..
any thoughts / advice would be much appreciated.
i have a 997.2 PDK Carrera S, it had a problem with the displacement sensor so i had it replaced with a T-Design part recently. The gearbox recalibration was complete and now trying to re-program the clutch calibration. it has been over a week now and it always gives an error. "Data Record for Clutch calibration is invalid" also on occasion when you try to initiate the "clutch Teach" it will come up with "Function cannot be performed, threshold not programed or programmed incorrectly"
I have heard that this calibration has to be performed with the engine / gearbox up to temperature, at the moment it seems like it is going over temperature before the calibration is complete, then you have to let the car cool down to re-start the process. which means maybe 2 attempts / day. I live in the caribbean so ambient temps are around 32C every day..
any thoughts / advice would be much appreciated.