Geometry Checks

[andrew symms]

I have found a guy in Weymouth who has the full Hunter Hawkeye Four Wheel Alignment Equipment, same as Centre Gravity, but on your doorstep!
The inside shoulders of the Turbo rear tyres were wearing off, so booked in for an alignment check, suprise suprise, both back and front out of tolerance.
3hrs later all back within tolerance, James, the owner, is a bit of a perfectionist, and wont stop until its 100% right, very reasonable charges and didnt have to go Birmingham!
so its James at http://jrautotechnics.uk/four-wheel-alignment/ if you have any issues.

Lots of people seem to end up at his garage when the regular Kwik Fit type places cant get it right.

Andy

 

[Neil Haughey]

Thanks for that Andrew, good to know.

 

[RichD1]

Hi Andy, do they also do ride height and corner weights or just alignment?

Richard

 

[andrew symms]

Richard

they can definitely do the ride height as I saw the data on the screen, not sure about corner weights but give james a ring and have a chat with him

andy

 

[911 targa]

Why didn't you ask before Andy
Paul

 

[RichD1]

I dropped in on James at JRauto... and had a chat. They can't do corner weights but he did show interest and said that he would speak to Tim at Marque21 to see if it would be practical. I guess it will be down to investment cost and how much business it would generate.

I'll let you know if he gets back to me.

Richard

 

[Spiggy1960]

Had mine done at Marque 21 and am very happy with the result. Don't know about corner weights but they run several race cars for clients so, I'm sure, would be worth chatting to.....