Menu toggle

Turbo Inlet Manifold Banjo Bolts

gajh

gajh

New member
Hi all,

does any one know the size of the banjo bolts and the hose ends, I need to make up the hoses, I can find the part number for the bolts but no information on sizes or the ends. Thanks Image here
 
Off the top of my head I used either 3mm or 4mm silicon tubing to replace mine if that's what you mean.

I can measure it tomorrow for you if you want as I've got plenty spare in the garage.
 
It is 4mm IRRC that I used but it is really not that critical as long as it is all replaced and airtight. With the banjo bolts just see what bolts you have that fit in there of the right size thread. I think they are a little weird and have a 12mm AF bolt head but again whatever you can purchase that does the job will be adequate. Just make sure you have copper washers front and back to ensure a good seal. Can't express enough - no leaks [:)]
 
thanks for the info but it looks like I need the complete control line (metal pipes that run under the manifold) unfortunately I was told that the engine was complete but looks like it isn't. So now on the hunt for the control line and associated bits [:(]
 
You must log in or register to reply here.

Posts made and opinions expressed are those of the individual forum members

Use of the Forum is subject to the Terms and Conditions

Disclaimer

The opinions expressed on this site are not necessarily those of the Club, who shall have no liability in respect of them or the accuracy of the content. The Club assumes no responsibility for any effects arising from errors or omissions.

Porsche Club Great Britain gives no warranties, guarantees or assurances and makes no representations or recommendations regarding any goods or services advertised on this site. It is the responsibility of visitors to satisfy themselves that goods and/or services supplied by any advertiser are bona fide and in no instance can the Porsche Club Great Britain be held responsible.

When responding to advertisements please ensure that you satisfy yourself of any applicable call charges on numbers not prefixed by usual "landline" STD Codes. Information can be obtained from the operator or the white pages. Before giving out ANY information regarding cars, or any other items for sale, please satisfy yourself that any potential purchaser is bona fide.

Directors of the Board of Porsche Club GB, Club Office Staff, Register Secretaries and Regional Organisers are often requested by Club members to provide information on matters connected with their cars and other matters referred to in the Club Rules. Such information, advice and assistance provided by such persons is given in good faith and is based on the personal experience and knowledge of the individual concerned.

Neither Porsche Club GB, nor any of the aforementioned, shall be under any liability in respect of any such information, advice or assistance given to members. Members are advised to consult qualified specialists for information, advice and assistance on matters connected with their cars at all times.

Porsche
Lockton
Pirelli
Officially approved
Oracle Finance
WEX Esso
Collecting Cars
Back
Top