Menu toggle

Steering column problems

JohnP

New member
Last weekend, whilst away with a bunch of friends driving in NW Scotland, it became increasingly difficult to adjust the position of the steering wheel in my 06 Cayman S (66k miles). Eventually there was no vertical adjustment and fore and aft adjustment was difficult and accompanied by a ratchety sound. The steering response was normal. Initial phone contact with my indie was inconclusive but he promised to ask around OPCs and/or Porsche to get another opinion. The consensus was not good; a 'failed' steering column (apparently not as rare as we might expect) was the worst case scenario (£850 + 9 hours labour + VAT). "Bring it in" said my indie (911Sport in Horncastle) "and we'll take a look".

When the adjustment release catch is moved it turns a rod alongside the column which, in turn, moves the locking mechanism allowing adjustment to be made. Part of this mechanism is a spring held in place by a plastic nut. Over time the nut had worn and was failing to grip properly, gradually unscrewing with each use of the release catch. The solution - one nyloc nut to lock the cheap plastic one in place. Less than one hour's labour and one small nut. Thank goodness for indies!

It is worth mentioning that my car is used by quite a few other drivers, all of whom have been taught to adjust their seating position on first entering a car before taking any further action, so wear and tear of the mechanism is probably more than usual. But if you do have similar problems at least you know what it could be.
 
Thanks for that John. Glad you got it sorted quickly - and cheaply too.! Likely to be a rare occurence I would think, but applicable to all 987 and 997 vehicles. Also, I would guess that the design has been carried-over to the latest 981/991 ranges. Jeff
 
Afternoon everyone, I have a question that no doubt has been raised before regarding the steering column adjustment, on my '98 986 boxster it just does not move at all, checked the plastic nut all seems fine with that, done all the usual things of penetrating oils, tried to move the spring in the housing and used all my strength to pull the wheel in and out but no joy, whats next is the question to release this?
 
Hi Eric,

Your Driver’s Manual will confirm but it seems that the column on the 986 only moves in and out and not up and down, and it appears that you’re referring to the former. If the wheel’s not been adjusted for a long time it’s probable that this is the cause of the mechanism locking-up.

It sounds as though you’ve tried the obvious remedies without success so maybe the only way to free it up is to use some “shock treatment” … a judicious tap in the vicinity of the clamp could get things moving [don’t forget to immobilise the airbag!😳]. The steering wheel is the only item where an axial force might be applied and you’ll risk damaging it, and space is very limited, so unfortunately anything more drastic probably will require removal of the column assembly to get better access.☹️

Jeff
 
Hi Eric,

Your Driver’s Manual will confirm but it seems that the column on the 986 only moves in and out and not up and down, and it appears that you’re referring to the former. If the wheel’s not been adjusted for a long time it’s probable that this is the cause of the mechanism locking-up.

It sounds as though you’ve tried the obvious remedies without success so maybe the only way to free it up is to use some “shock treatment” … a judicious tap in the vicinity of the clamp could get things moving [don’t forget to immobilise the airbag!😳]. The steering wheel is the only item where an axial force might be applied and you’ll risk damaging it, and space is very limited, so unfortunately anything more drastic probably will require removal of the column assembly to get better access.☹️

Jeff
Evening Jeff, thanks for the prompt reply, I will try a little “shock treatment” and a “judicious tap” in the vicinity of the clamp to see if it releases it, thanks for the tip.
 

Posts made and opinions expressed are those of the individual forum members

Use of the Forum is subject to the Terms and Conditions

Disclaimer

The opinions expressed on this site are not necessarily those of the Club, who shall have no liability in respect of them or the accuracy of the content. The Club assumes no responsibility for any effects arising from errors or omissions.

Porsche Club Great Britain gives no warranties, guarantees or assurances and makes no representations or recommendations regarding any goods or services advertised on this site. It is the responsibility of visitors to satisfy themselves that goods and/or services supplied by any advertiser are bona fide and in no instance can the Porsche Club Great Britain be held responsible.

When responding to advertisements please ensure that you satisfy yourself of any applicable call charges on numbers not prefixed by usual "landline" STD Codes. Information can be obtained from the operator or the white pages. Before giving out ANY information regarding cars, or any other items for sale, please satisfy yourself that any potential purchaser is bona fide.

Directors of the Board of Porsche Club GB, Club Office Staff, Register Secretaries and Regional Organisers are often requested by Club members to provide information on matters connected with their cars and other matters referred to in the Club Rules. Such information, advice and assistance provided by such persons is given in good faith and is based on the personal experience and knowledge of the individual concerned.

Neither Porsche Club GB, nor any of the aforementioned, shall be under any liability in respect of any such information, advice or assistance given to members. Members are advised to consult qualified specialists for information, advice and assistance on matters connected with their cars at all times.

Back
Top