Guest
New member
I've just replaced the rear pads on my 2.7. The pads were quite worn and the pad worning light was illuminated on the dashboard. I 've put them all back together bar one set of warning wires on the pads as the ends were damaged. The problem is that the warning light is still lit on the dash. I then unplugged each electrical connector in turn by each rear wheel to try and find out which one is causing me problems, but still the light remained on. The front pads are quite new and have hardly any wear. Could I unplug all 4 warning connectors on each wheel to find out which one is playing up? I'm not sure how the circuit is wired?
Thanks for any help recieved. Jason.
Thanks for any help recieved. Jason.