Question for MarkK and Fen or anyone who has fitted a Turbo wing logo

[Lemon]

Hi Guys

Right I have just picked up my Turbo Wing Logo and want to fit it this weekend.

Firstly do either of you have a picture of your wing logos to give me a guideline of where it fits on the wing?

And secondly as you have already fitted one Fen any hints and tips ( ie spraying water on wing first etc )

Would you clay the wing first to make sure wing is squeeky clean to...

Thanks a lot

Lee

 

[944 man]

Soapy water: a squeegee helps too, although the wing top isnt the ideal place to use one.

 

[Copperman05]

http://www.autosportz.com/article_how_to_apply_car_decals_graphics.htm

I would recommend a squeegy or old credit card, also a friend to help would be useful.

Good luck

Edd

 

[MarkK]

Hi Lee just PMed you!![]

 

[eastendr]

Positioning and fitting guide is in the 944 workshop manual - volume 6 - turbo supplement.

Out of interest, what colour did you get and how much did it cost ?

 

[MarkK]

Here is my first uploaded pic,hope it helps![]

 

[sawood12]

Oooh, that looks so nice!! How's she running these days Mark? Still blowing your socks off?

I rang my OPC up about 12 months ago to enquire about the cost of one of these and it was circa £70 if I recall correctly. A bit pricey so is sitting near the bottom of my current wish list.

 

[MarkK]

Great thanks[]!

 

[Frenchy]

Washing up liquid in warm water lets you move it around until your happy,move the air bubbles out with a squedgie or similar,apply some mild heat with a hairdryer when happy,the O in turbO pretty much follows the front line of the wing.

 

[Fen]

What he said.^^^ Exactly.

 

[944Turbo]

ORIGINAL: MarkK

Here is my first uploaded pic,hope it helps![]

There is a box to tick at the bottom that says 'embed picture in post' that will show a thumbnail in your post - more please

 

[MarkK]

Thanks Tony its embeded now!![]

 

[xenon]

I didn't think I'd like that. But I do. A lot.

 

[Lemon]

Well here is a few pics of the Turbo Wing Logo fitted.

Got a local sign company to fit it, although a few issues with it, so it may end up being done again. It came with a slight kink in the sticker from Porsche and I thought it would smooth out, but it appears not to. I should have swapped it as difficult to prove now on the car. Will leave it 24 hours to adhere properly and if the slight issue can be cut slightly I will leave it on.

Looks good though in the silver. I will get some better pictures done of it over the weekend

 

[Lemon]

And another []

 

[MarkK]

looks nice in silver against the blue.!

 

[Fen]

That looks the monkey's spunkies.

 

[Suffolk944]

They do look great - is on my list of things to do, even at OPC prices if needs be...

 

[Lemon]

ORIGINAL: Suffolk944

They do look great - is on my list of things to do, even at OPC prices if needs be...

Well for everyones info they are £47 plus the dreaded VAT

But I must admit now fitted I do like it[]

 

[Lemon]

Slightly better picture of Logo on wing