Lose Inner Wing Cover - A piller (Left & right)

[DenAtherton]

Hi
I have a 2018 991.2 C4S
The Inner plastic A pillar covers (part number 991 504 641(2) 00 1EO) are held on with 2 x Black Pastic Rivets
both have worked loose. Very tricky to access (its those pastic covers that when you open the door - and put you hand into the gap
under the A pillar.

Is there a way to replace these 2 x Black rivets without removing the doors?

Thanks
Den Atherton

 

[Lancerlot]

It's not clear which part you are referring to since you mention wing cover, then A pillar and finally door cover.
It's American but maybe this website will be helpful in identifying your parts

https://porsche.oempartsonline.com/v-2018-porsche-911--carrera-4s--3-0l-h6-gas/body--interior-trim-front-structure

Regards,

Clive

 

[GM_991_2_GTS]

Some rivets have a two tier top, so the very top part of it can be prised or pulled out/up and it releases the grip inside the panel. Some don't though and are pulled out and flexible ribs which aren't damaged with removal/refitting. This type has a solid head and not a head made of two parts. Hopefully that makes? You might have to bite the bullet the and simply pull one out using a couple of screwdrivers and some tape or material to protect the surfaces you see. Once out either google it and head to Ebay where most clips/rivets etc are obtainable OR head to an OPC.