VanhireBoys
Member
Hi Gents
Back on the road once again with my beloved 944.... And loving it...! Now that I have done a few major jobs I am starting to tackle the smaller niggly stuff.....!
Background
I never had a key for the passenger side door or tailgate.. I only ever had one key and this is for the drivers door and ignition. A good friend of mine is a very good locksmith and when I lost my keys due to a fire he made up a key from the door lock barrel... I asked him about the passenger door and tailgate and he said that he could make keys up again but the lock barrels will have to be removed - Also he said he might be able to reset them to the same profile as my ignition key... He said he can get the wafers but it may take a few days...
Question
I have 2 scrapper 924's at my home place.... Could I take the barrels from one of them (1 is 81 the other is 83) and let him reset the wafers in them then fit them to the 944....? I did notice that the part nos were different ! Is there much of a physical difference....? It would be handy to just get the barrels reset and fit them rather than have the car parked up again and will save me a stripping match ...!
(Door 944) 944-538-903-00 ( 924 ) 477-837-217
(Boot 944) 944-538-91- 00 ( 924 ) 477-898-082
Thanks in Advance lads [
]
Back on the road once again with my beloved 944.... And loving it...! Now that I have done a few major jobs I am starting to tackle the smaller niggly stuff.....!
Background
I never had a key for the passenger side door or tailgate.. I only ever had one key and this is for the drivers door and ignition. A good friend of mine is a very good locksmith and when I lost my keys due to a fire he made up a key from the door lock barrel... I asked him about the passenger door and tailgate and he said that he could make keys up again but the lock barrels will have to be removed - Also he said he might be able to reset them to the same profile as my ignition key... He said he can get the wafers but it may take a few days...
Question
I have 2 scrapper 924's at my home place.... Could I take the barrels from one of them (1 is 81 the other is 83) and let him reset the wafers in them then fit them to the 944....? I did notice that the part nos were different ! Is there much of a physical difference....? It would be handy to just get the barrels reset and fit them rather than have the car parked up again and will save me a stripping match ...!
(Door 944) 944-538-903-00 ( 924 ) 477-837-217
(Boot 944) 944-538-91- 00 ( 924 ) 477-898-082
Thanks in Advance lads [