Martin Sage
New member
Ok no problem and good luck to Frank. Be interested to see what he thinks of it and wonder why you are going back to the proper air box! Are you able to tell me where you got the adaptor from?
I've had an idea!!!! Freecycle!!
- Thread starter homesea
- Start date
I'm not sure where it came from Martin, it was fitted to the car when I bought it. I had been told that these engines run quite hot and there was no heatshield, just the cone filter on the end of the AFM, and the cone filter wasn't a great quality one. As Norm still had the airbox (I beleive previous owner to him fitted the filter) I decided to refit it, although I am missing the intake duct so probably still suffering from heat soak. I'd say something like an enclosed airbox with good ducting may be beneficial, but over the years I have tended to stick with OE airbox designs with good quality filters, unless they are a known restriction. But if you want a bit of induction noise then why not!!
Mine's cracked to one side
pauljmcnulty
Active member
Hi Paul, That was a post from 2013, and Rich hasn't logged on to the forum for over a year. Don't hold your breath! [&o] A post in the wanted forum, or just on the regular 944 forum, should get more results.
Neil Haughey
New member
I have 4x 225x50-16 Michelin Cups part worn which are free to a good home. We are moving house and I have already 2 other sets of wheels and track tyres to get through.
LWray
New member
Looks like noone has really been using this as of late but thought id put it out there....
I have a working headlight mechanism for 944, bought it but my own was fine
Lower Cam belt outside section of cover
the textured cover part of the headlights both drivers and passengers, non s2
pass side non s2 headlight
standard front springs for 2.7
6x4 speakers
spare late 90s cd head unit
Im after the cable that attachs the motor to the release mechanism in the boot
or
Bonnet struts that'll hold the bonnet up!
I have a working headlight mechanism for 944, bought it but my own was fine
Lower Cam belt outside section of cover
the textured cover part of the headlights both drivers and passengers, non s2
pass side non s2 headlight
standard front springs for 2.7
6x4 speakers
spare late 90s cd head unit
Im after the cable that attachs the motor to the release mechanism in the boot
or
Bonnet struts that'll hold the bonnet up!
Nice one Colin,,,colin944 said:
A great idea and must have a look in my garage,,
I know I have a machine polisher that I used once or twice
Might have some og indicators that I swapped for clear ones on my red s2
Must have a proper look,,
Zzcapgo is having my old/newish exhaust,,,
LWray
New member
Few things I have that might be of use to someone:
Tension bar for alterator, brand new never used
Massive handbrake shoes brand new
Small brake shoes brand new
( I was told there is only two sizes when ordering them, first was too small, second too big)
Used but working crank sensor
Tension bar for alterator, brand new never used
Massive handbrake shoes brand new
Small brake shoes brand new
( I was told there is only two sizes when ordering them, first was too small, second too big)
Used but working crank sensor
Posts made and opinions expressed are those of the individual forum members
Use of the Forum is subject to the Terms and Conditions
