So far all attempts to programme Homelink to my garage doors have failed. No-one seems too keen to assist either. Contacted the door manufacturer, the installer and the PC, but so far no luck. [8|]
I've managed to programme the automatic gates - no problem there, so I know I'm on the right track, but the wretched garage doors refuse to cooperate! []
I get halfway there with the car accepting the signal from the garage remote by flashing its indicators at me 3 times, but that's about as far as it gets. There are no programming instructions with my roller shutter doors (SWS), but I removed the outer casing and located the learning button in its controller box. This beeps at me, but doesn't seem to permit synchronisation with the Homelink button in the car.
Any suggestion would be gratefully received. The Homelink website is pretty unhelpful, although it does say the Teleco door control box I have is compatible.
Last time I had this problem was around 4 years ago when my 911 Homelink only operated on the 433 MHz frequency, whereas I was told the doors are 868 MHz. I've no idea if this was true as I've no way of checking these frequencies, but I would have thought the Homelink now installed by Porsche in their cars would cover during the intervening 4 year period since I understand most modern doors now work on 868 MHz.
Yours completely flummoxed,
Clive
I've managed to programme the automatic gates - no problem there, so I know I'm on the right track, but the wretched garage doors refuse to cooperate! []
I get halfway there with the car accepting the signal from the garage remote by flashing its indicators at me 3 times, but that's about as far as it gets. There are no programming instructions with my roller shutter doors (SWS), but I removed the outer casing and located the learning button in its controller box. This beeps at me, but doesn't seem to permit synchronisation with the Homelink button in the car.
Any suggestion would be gratefully received. The Homelink website is pretty unhelpful, although it does say the Teleco door control box I have is compatible.
Last time I had this problem was around 4 years ago when my 911 Homelink only operated on the 433 MHz frequency, whereas I was told the doors are 868 MHz. I've no idea if this was true as I've no way of checking these frequencies, but I would have thought the Homelink now installed by Porsche in their cars would cover during the intervening 4 year period since I understand most modern doors now work on 868 MHz.
Yours completely flummoxed,
Clive