Menu toggle

Electric window wiring

stephenh

stephenh

PCGB Member
Member
As part of the rebuild on my SC I am really struggling trying to get the loom from the under bonnet area into the door. I have threaded the cable thro' the bulkhead hole but cannot get the female grommet to locate properly. It needs to be secure in the metal hole to enable the male connector to mate up. I have tried warming up the parts as well as rubber grease etc. Has anyone got any suggestions?
9ACE735D461D43B8820087B06C432DCD.jpg

 
Yes they can be a pig to get in. Give the female connector a good clean with brake cleaner. Heat the female part with a hairdryer. Put some fairly liquid in a small container with a bit of water. Apply it around the edge of the female connector. Put the female connector in the hole, push and rotate at the same time. It should slide in. It works for me. Rich
 
Thanks Richard, yes it worked for me as well! Both sides now done & all the wires into the doors. I can now start re building the door internals. Looks like the car only had one mirror originally as there is only a loom going to the drivers side? I will have to make up a loom as there are 2 mirrors to fit!
AAB6046E66FD4793A8D3DAEC0B7723A8.jpg

 
You must log in or register to reply here.

Posts made and opinions expressed are those of the individual forum members

Use of the Forum is subject to the Terms and Conditions

Disclaimer

The opinions expressed on this site are not necessarily those of the Club, who shall have no liability in respect of them or the accuracy of the content. The Club assumes no responsibility for any effects arising from errors or omissions.

Porsche Club Great Britain gives no warranties, guarantees or assurances and makes no representations or recommendations regarding any goods or services advertised on this site. It is the responsibility of visitors to satisfy themselves that goods and/or services supplied by any advertiser are bona fide and in no instance can the Porsche Club Great Britain be held responsible.

When responding to advertisements please ensure that you satisfy yourself of any applicable call charges on numbers not prefixed by usual "landline" STD Codes. Information can be obtained from the operator or the white pages. Before giving out ANY information regarding cars, or any other items for sale, please satisfy yourself that any potential purchaser is bona fide.

Directors of the Board of Porsche Club GB, Club Office Staff, Register Secretaries and Regional Organisers are often requested by Club members to provide information on matters connected with their cars and other matters referred to in the Club Rules. Such information, advice and assistance provided by such persons is given in good faith and is based on the personal experience and knowledge of the individual concerned.

Neither Porsche Club GB, nor any of the aforementioned, shall be under any liability in respect of any such information, advice or assistance given to members. Members are advised to consult qualified specialists for information, advice and assistance on matters connected with their cars at all times.

Porsche
Lockton
Pirelli
Officially approved
Oracle Finance
WEX Esso
Collecting Cars
Back
Top