Menu toggle

Cayman headlight issues

Welsh Pilot

PCGB Member
Member
Hello
The headlights on my 2009 Gen 2 Cayman s (particularly) the main beam are in my opinion quite poor and I have notice a strange pattern in the beam of the nearside one , I have read that the
Bi-Xenon bulbs do fade after time and as she is some 17 years old now perhaps they could do with being replaced . I wonder if the members could suggest what they have used or upgraded too.
she has the factory headlight washers so the 35 watt system with a ballast box behind the bulb .

thanks in advance
Bryan
 
Hi Bryan,

I also own a 2009 987.2 CS and have the PDLS system which has the headlight washers. I‘m sure that the washers were fitted only with that system and not with the standard lights owing to their higher power output, so are you sure that you don’t have the PDLS on your car, which in my experience is superb?

Jeff
 
Hi Bryan,

I also own a 2009 987.2 CS and have the PDLS system which has the headlight washers. I‘m sure that the washers were fitted only with that system and not with the standard lights owing to their higher power output, so are you sure that you don’t have the PDLS on your car, which in my experience is superb?

Jeff
Hello Jeff
According to the build sheet i have "1603 Xeon plus dynamic cornering light" but as i say the main beam is poor with a strange pattern , there is no damage or anything in the lens I can see ???
 
Yes, they weren’t called PDLS then, just dynamic cornering lights as above. I had them on my 2009 Gen 2 Cayman S from new and thought they were fantastic. Sounds like new bulbs and an inspection of the internals might be a good first step. Correct bulbs will be available from OPC with PCGB discount. If I remember correctly the handbook lists the bulb types so a bit of Googling should reveal current equivalents to enable OPC price comparison.
 
Bryan,

Looking online it seems that the main beam utilises a D2S Xenon [HID] bulb, although from what you describe it sounds as though there could be something else at play, electrical and/or mechanical. As Brian has suggested, an internal inspection of the unit would seem advisable to confirm that the complex electro-mechanical mechanism as well as the ballast unit are working correctly.

As I said, and confirmed by Brian, the lights on my car - both main and dipped beam - are superb.

Jeff
 
Thinking, as you have noticeable strange pattern with nearside beam and not offside beam, how about swapping nearside and offside bulbs to see if this is bulb or electrical issue.

May also find residue / damp has built up over time impeding current flow.
 
Thank you all for your replies , most appreciated , I tested the system last night and the headlights go through the "self test " headlamp wiggle perfectly , when up close to a wall the nearside light has a yellowish/green line in the pattern ?? so I am suspecting the bulb , I looked through the cars service invoices and the strange patters was noted but as I rarely use her at night I left it alone as it didn't bother me but as I now try to use her more its a pain , will try the bulb swap method first and report back .
 
Bryan,

I’ve just had a look in the Driver’s Manual for the 987.2 and the Bulb Chart [p204] gives the following information:

Bi-Xenon dipped beam/high beam - Philips, D2S 35W

Additional Bi-Xenon main beam - H7, 55W

If your dipped beam is working okay it’s possible that your problem could lie with the additional main beam bulb, but note that apparently the dipped beam/high beam bulb uses a solenoid-actuated mechanical shield/shutter to create a sharp dipped beam cutoff and maybe it’s malfunctioning … stuck in the dipped beam location perhaps?:unsure:

As marc has suggested it would be worth swapping-out both bulbs from the offside to see if you still get the same problem; and if so you’d have to suspect that the shield/shutter could be the issue.

Jeff
 
OK all
So I tried swapping over from side to side all bulbs , and the power packs , had a good look at the lenses etc , nothing seems out of place to me?? but the problem is the same !!
I attached pictures of the light pattern so you can hopefully give me a solution ? . They are of both dipped and main beam .
The middle of both bulbs seem cloudy /frosted in the middle where the lump is , all new ones I looked at online are clear ?? i took a pic but not a good one .
thanks
 

Attachments

  • 902362612_30044966518438859_3770668426762999987_n.jpg
    902362612_30044966518438859_3770668426762999987_n.jpg
    195.7 KB · Views: 9
  • 904492684_30044965861772258_1158708352125413869_n.jpg
    904492684_30044965861772258_1158708352125413869_n.jpg
    96.1 KB · Views: 9
  • 903366460_30044965078439003_7849364289701686417_n.jpg
    903366460_30044965078439003_7849364289701686417_n.jpg
    140.6 KB · Views: 9
  • 905578967_30044964261772418_4161120985557387394_n.jpg
    905578967_30044964261772418_4161120985557387394_n.jpg
    182.4 KB · Views: 9
  • 903470846_30044967705105407_1397839938219725122_n.jpg
    903470846_30044967705105407_1397839938219725122_n.jpg
    139.5 KB · Views: 9
OK all
So I tried swapping over from side to side all bulbs , and the power packs , had a good look at the lenses etc , nothing seems out of place to me?? but the problem is the same !!
I attached pictures of the light pattern so you can hopefully give me a solution ? . They are of both dipped and main beam .
The middle of both bulbs seem cloudy /frosted in the middle where the lump is , all new ones I looked at online are clear ?? i took a pic but not a good one .
thanks
Be very careful when handling those bulbs because they operate at quite a high temperature do not handle with bare hands, just wrap a tissue round them as body grease on your fingers can damage the glass.
 
Xenon bulbs do degrade over time, it's recommended best to change after 5 -7 years. so 17 year old xenon bulbs will only have a fraction of their light output and the cloud will have changed too.
Changing for new bulbs will make quite a difference - we put new xenon bulbs in a 14 year old Land Rover and the results were pleasing.
Our Lupo GTI xenon bulbs were over twenty years old and were dimmer and yellower than halogen headlights, we replaced the D3S Xenons with LED replacements and these are fabulous, much better.
We have just replaced the xenon bulbs in nine year old Macan with LED replacements, these too are great.
No issues with fitting, no CANBUS issues either, no fault codes etc; just a straight replacement.
We got our LED replacements from these guys who do seem to know what they are doing for properly compatible LED replacements for Xenons.

Xenons Online: The Automotive Lighting SpecialistsXenons Onlinehttps://www.xenonsonline.com
 
Ok well changed bulbs to 2 Osram xenarc origional DS2 and 2 Katur H 7 LED XEON (Which had good reviews on amazon but dont seem any better than the standard halogen ones ?? yet to try a drive though ) and sorry to say no difference , still got that pattern on the wall ??? not sure what to do now ? any other ideas .
thanks
 

Posts made and opinions expressed are those of the individual forum members

Use of the Forum is subject to the Terms and Conditions

Disclaimer

The opinions expressed on this site are not necessarily those of the Club, who shall have no liability in respect of them or the accuracy of the content. The Club assumes no responsibility for any effects arising from errors or omissions.

Porsche Club Great Britain gives no warranties, guarantees or assurances and makes no representations or recommendations regarding any goods or services advertised on this site. It is the responsibility of visitors to satisfy themselves that goods and/or services supplied by any advertiser are bona fide and in no instance can the Porsche Club Great Britain be held responsible.

When responding to advertisements please ensure that you satisfy yourself of any applicable call charges on numbers not prefixed by usual "landline" STD Codes. Information can be obtained from the operator or the white pages. Before giving out ANY information regarding cars, or any other items for sale, please satisfy yourself that any potential purchaser is bona fide.

Directors of the Board of Porsche Club GB, Club Office Staff, Register Secretaries and Regional Organisers are often requested by Club members to provide information on matters connected with their cars and other matters referred to in the Club Rules. Such information, advice and assistance provided by such persons is given in good faith and is based on the personal experience and knowledge of the individual concerned.

Neither Porsche Club GB, nor any of the aforementioned, shall be under any liability in respect of any such information, advice or assistance given to members. Members are advised to consult qualified specialists for information, advice and assistance on matters connected with their cars at all times.

Back
Top