Menu toggle

Airflow Sensor to Air Cleaner O-ring dimensions

T

tref

PCGB Member
Member
Gentlefolk,

Could anyone advise me of the dimensions of the O-ring between the Airflow Sensor and Air Cleaner assemblies please? Guessing 80mm ID, just really need to know the section.

Many thanks,

Tref.
 
Aren't there three o rings? Anyway sizes are 82-2.5 and 65-3.0 The one your after isn't specified. Taken from PET
 
Thanks Geoff! I looked on PET and all I could see it say was "999 707 206 40 - O-ring" 82 x 2.5 sounds about right.
The other one is all in place, this is me 3d printing a new duct from S2 aircleaner to 968 MAF, before I was using a hose to link, jubilee clipped to the MAF.

Thanks again,

Tref.
 
that O ring is about 8mm in diameter and not shown in PET for a size

the other two mentioned above are for the Throttle body to manifold connection,

I can go over the garage later and measure mine if you wish,

999.707.206.40 £2.45 Inc Vat
 
Ok i have measured it as best I can

looks like 82-83mm ID, 6mm thickness, came up as 5.91mm on my 20p vernier


 
That is perfect - thank you! Enough for me to be able to design an O-ring groove to suit!

 
You must log in or register to reply here.

Posts made and opinions expressed are those of the individual forum members

Use of the Forum is subject to the Terms and Conditions

Disclaimer

The opinions expressed on this site are not necessarily those of the Club, who shall have no liability in respect of them or the accuracy of the content. The Club assumes no responsibility for any effects arising from errors or omissions.

Porsche Club Great Britain gives no warranties, guarantees or assurances and makes no representations or recommendations regarding any goods or services advertised on this site. It is the responsibility of visitors to satisfy themselves that goods and/or services supplied by any advertiser are bona fide and in no instance can the Porsche Club Great Britain be held responsible.

When responding to advertisements please ensure that you satisfy yourself of any applicable call charges on numbers not prefixed by usual "landline" STD Codes. Information can be obtained from the operator or the white pages. Before giving out ANY information regarding cars, or any other items for sale, please satisfy yourself that any potential purchaser is bona fide.

Directors of the Board of Porsche Club GB, Club Office Staff, Register Secretaries and Regional Organisers are often requested by Club members to provide information on matters connected with their cars and other matters referred to in the Club Rules. Such information, advice and assistance provided by such persons is given in good faith and is based on the personal experience and knowledge of the individual concerned.

Neither Porsche Club GB, nor any of the aforementioned, shall be under any liability in respect of any such information, advice or assistance given to members. Members are advised to consult qualified specialists for information, advice and assistance on matters connected with their cars at all times.

Porsche
Lockton
Pirelli
Officially approved
Oracle Finance
WEX Esso
Collecting Cars
Archant Dialogue
Back
Top