Kongsodoken
Active member
I was going to include this in my rebuild thread but I was so impressed thought it needed a thread to itself[
]
so take one dirty throttle body
and turn it into this
how was it done well the seals were toast[
]
so the seal stop oil being blown into the TPS , I know that people sometimes change the seals with some success but to do the job right then replace the bearings with twin seal units
NOT my work done by Simon Peckham I believe the cost is around £100 well worth it IMHO
so take one dirty throttle body

and turn it into this

how was it done well the seals were toast[

so the seal stop oil being blown into the TPS , I know that people sometimes change the seals with some success but to do the job right then replace the bearings with twin seal units


NOT my work done by Simon Peckham I believe the cost is around £100 well worth it IMHO

