Hi folks, my rear wiper (944 lux 1986) was getting noisey so I dismantled it, gave it some fresh grease and put it back together and now the problem started. When I press the switch now it sweeps the window and on the way back stops halfway across the window! You can still hear the motor and have to take it back to the rest position by hand. I've taken the casing apart and what is happening is the worm gear is slipping as the wiper goes back, is this because I've put to much grease in? Any body any experience of this and how do you dismantle the whole set of cogs 'cos thats what I will have to do to clean all the grease off?
Thanks
![. [FONT=verdana,geneva"] [FONT=verdana,geneva"]](/forum/styles/default/pcgb/space.gif)
![. [FONT=verdana,geneva"] [FONT=verdana,geneva"]](/forum/styles/default/pcgb/space.gif)
![. [FONT=verdana,geneva"] [FONT=verdana,geneva"]](/forum/styles/default/pcgb/space.gif)
![. [FONT=verdana,geneva"] [FONT=verdana,geneva"]](/forum/styles/default/pcgb/space.gif)
![. [FONT=verdana,geneva"] [FONT=verdana,geneva"]](/forum/styles/default/pcgb/space.gif)
![. [FONT=verdana,geneva"] [FONT=verdana,geneva"]](/forum/styles/default/pcgb/space.gif)