Menu toggle

Aircon

S

steves944

New member
Not sure if this has been asked before - I have just purchased a 1994 968 and the aircon is not working. I have been struggling to find anybody to sort it as mine was an after market fit by DIAVIA UK who no longer exist

I have tried 2 companies who have attempted refill the system but it will not work and over pressurises.
I am possibly not the only person with this problem - any thoughts who could help?

Thanks

Steve
 
Blimey, a new one on me, and a pity that the guys who have tried can't identify the problem. Was it an incompatible fittings or valves issue?

I have used in the past and can recommend this chap - http://www.autoairconditioningltd.co.uk/index.html (I remember him being Byfleet way, but not sure). He knew Porsches and 911's so might have some idea or can advise.

Be interested to hear how you get on..
 
Hi

Not sure what their issues were , one was a ex Diavia agent many years ago. To be fair they spent hours checking for leaks then filled the system , including an oil , with r134a. When we fired up the aircon it apparently went way over pressure and they advised it could blow the rad or damage the compressor. They drained it out. I gather an old system on r12 needs r12 gas?
Am seeing a guy in Dorchester who still retrofits aircon and repairs the many older cars with aircon.
What amuses me is there is apparently an EU ban on r12 gas but it's still readily available in France/Belgium/Germany/Poland etc etc .....only not in the UK!
I will post the outcome. There must be 000's cars on old aircon systems.
 
Interesting. The conversion over from the old gas is pretty straightforward - some valve/adaptor changes. Inexpensive too. My '90 964 was done with no problem. Is there a problem with the a/c condenser?
 
Well this what confuses me , the guy in Dorchester tells me it's absolutely straightforward and that he will have me up and running no problem (assuming there are no actual mechanical issues ) Yet my local specialist in bedford who spent hours, did get some cooled air coming through but after 2 or 3 minutes running the aircon pressure just went off the scale!
 
Sounds like maybe the need to move off from the old system first and then go from there rather than trying to get someone to persevere. All pipes and condenser stay as is - it should just be swapping out the old fittings on the compressor / refill points for the newer ones. Of course the caveat being that the Diavia unit you have hasn't got some proprietary design or unique mix of fittings/threads etc... I'm certainly no expert but if a/c is important to you then maybe someone can advise on a replacement system - assuming that as an aftermarket fitting in the first place makes it much easier to remove/replace too...
 
Connections were standard (r12) fittings. I am told that all rubber tubes would need re placement as they would be 'porous' to the new gas. Also possibly my condenser and under dash unit due to the higher pressures . I use the car for trips abroad but now the system needs a re gas it's only just become an issue. In the uk I can just open a window!
 
Hmmm... give the guy at munitioned a call, see what he thinks. I'm sure, or had thought, that the replacement gas didn't require in most/nearly all cases a wholesale plumbing replacement... maybe just the seals/o-rings on existing kit to neoprene type.

Here's an interesting read - http://www.griffiths.com/achelp/achelp3.html

Maybe something here somewhere too - http://acsource.net/acforum/viewforum.php?f=1



 
You must log in or register to reply here.

Posts made and opinions expressed are those of the individual forum members

Use of the Forum is subject to the Terms and Conditions

Disclaimer

The opinions expressed on this site are not necessarily those of the Club, who shall have no liability in respect of them or the accuracy of the content. The Club assumes no responsibility for any effects arising from errors or omissions.

Porsche Club Great Britain gives no warranties, guarantees or assurances and makes no representations or recommendations regarding any goods or services advertised on this site. It is the responsibility of visitors to satisfy themselves that goods and/or services supplied by any advertiser are bona fide and in no instance can the Porsche Club Great Britain be held responsible.

When responding to advertisements please ensure that you satisfy yourself of any applicable call charges on numbers not prefixed by usual "landline" STD Codes. Information can be obtained from the operator or the white pages. Before giving out ANY information regarding cars, or any other items for sale, please satisfy yourself that any potential purchaser is bona fide.

Directors of the Board of Porsche Club GB, Club Office Staff, Register Secretaries and Regional Organisers are often requested by Club members to provide information on matters connected with their cars and other matters referred to in the Club Rules. Such information, advice and assistance provided by such persons is given in good faith and is based on the personal experience and knowledge of the individual concerned.

Neither Porsche Club GB, nor any of the aforementioned, shall be under any liability in respect of any such information, advice or assistance given to members. Members are advised to consult qualified specialists for information, advice and assistance on matters connected with their cars at all times.

Porsche
Lockton
Pirelli
Officially approved
Oracle Finance
WEX Esso
Collecting Cars
Back
Top