Menu toggle

My 718 CGTS 4.0 PDK

Having thought long and hard, and consulted trusted friends, I have reluctantly and regrettably decided to take no further action on a return to the PEC Precision Driving Course. Many factors are at play in my reaching this decision. Not least of which is to be grateful for the two previous PEC opportunities which did so much to restore and improve my track diving skills prior to returning to competitive motorsport.

Dan is quite right in suggesting taking the PEC hire car rather than using your own car. Besides the obvious wear and tear on tyres and brakes, the Silverstone track sessions are shared with other cars driven by drivers of widely varying abilities. The appeal of driving your own car on this iconic circuit is a strong pull, but no matter how diligent you are at keeping it on the black stuff, other cars sharing the same track space can throw unpredictable consequences in the blink of an eye. Race cars driven by Pro-Am wannabes are always the last of the late brakers and will cut you up at the braking zone approach to slower corners. I had this very experience during the Pilot Sport Challenge when a sports racing Radical mugged me at the turn-in to Club corner. There was not a lot of room I can assure you.

It was a nice thought returning to Silverstone GP circuit for another go in a car as capable as the CGTS 4.0 PDK. On this occasion discretion overruled my heart. I'll rest on my past experiences.

Back to reality and the rewarding spectacle of the tall ships event at Aberdeen last weekend. This international maritime jamboree was a spectacular display of historic sailing ships of all sizes. Over 70 vessels attended during the 4 days at Aberdeen harbour. Visitors were efficiently marshalled on the quaysides to inspect the ships at their moorings, some of which were available for boarding. On the final day huge crowds lined Aberdeen beach promenades to watch the sail away to the next destination in Norway. It had been 28 years since the previous tall ships event at Aberdeen so it is unlikely, nay a certainty, that I shall live to see another revisit of this amazing event.

Brian.
IMG_7065.jpegIMG_7080.jpeg
 
Just as a matter of possible interest I did the PEC Precision Driving Course in 2019 in my then 987.2. I was glad to have done the course in my own car as it taught me a lot about my particular car. I didnt encounter any problems or issues with other cars on the Silverstone circuit; but I had the piece of mind that my car was covered for the day by my Lockton PCGB policy.
I then did a full PCGB track day at Silverstone a couple of weeks later, again covered by PCGB policy.
 
With the tourist season in the Highlands at its peak in early August, the roads are choc-a-block everywhere. The underfunded intercity road network north of Perth is overwhelmed with the convergence of commercial, tourist, local, and agricultural harvest traffic. It's mayhem frankly.

I thought this the ideal opportunity to do some more cosmetic remedial work on my CGTS 4.0. The scruffy rear brake disc bells have been a point of irritation for some time. Unsightly corrosion and staining have marred these easily visible components. It took me some time to source the correct shade of VHT paint to match the OE finish on disc bells. The ideal product came by way of Halfords no less. At £10.99 a can, the High Temperature Dark Anthracite paint has proved absolutely perfect for the job.

As most of you will already know, preparation is 99% of a successful job. Masking the exposed disc surface and brake callipers took considerable time and effort. I also carefully masked the bare metal surfaces where the road wheel contacts the hub. I have problems handling sticky masking tape due to my hand disability, but perseverance paid off and the considerable effort was worthwhile.

After cleaning the stained disc bell surface with solvent, I applied two coats of VHT paint. The first coat was directly applied thinly to the bare surface. No primer required. The second coat applied 4 hours later and left overnight to harden. The rear brake callipers are sufficiently spaced from the disc bell to enable the full 360 degree surface to be painted without having to rotate the hub, an operation complicated by PDK when the car is jacked up. With a manual car, the hub could be rotated with the gearbox in neutral. I found the gap between the calliper and the disc bell easily accessed by the paint spray nozzle to enable the entire 360 degree surface to be painted without rotating the hub.

The finished result is shown in the photos attached.

Brian.
IMG_7124.jpegIMG_7125.jpegIMG_7127.jpeg
 

Posts made and opinions expressed are those of the individual forum members

Use of the Forum is subject to the Terms and Conditions

Disclaimer

The opinions expressed on this site are not necessarily those of the Club, who shall have no liability in respect of them or the accuracy of the content. The Club assumes no responsibility for any effects arising from errors or omissions.

Porsche Club Great Britain gives no warranties, guarantees or assurances and makes no representations or recommendations regarding any goods or services advertised on this site. It is the responsibility of visitors to satisfy themselves that goods and/or services supplied by any advertiser are bona fide and in no instance can the Porsche Club Great Britain be held responsible.

When responding to advertisements please ensure that you satisfy yourself of any applicable call charges on numbers not prefixed by usual "landline" STD Codes. Information can be obtained from the operator or the white pages. Before giving out ANY information regarding cars, or any other items for sale, please satisfy yourself that any potential purchaser is bona fide.

Directors of the Board of Porsche Club GB, Club Office Staff, Register Secretaries and Regional Organisers are often requested by Club members to provide information on matters connected with their cars and other matters referred to in the Club Rules. Such information, advice and assistance provided by such persons is given in good faith and is based on the personal experience and knowledge of the individual concerned.

Neither Porsche Club GB, nor any of the aforementioned, shall be under any liability in respect of any such information, advice or assistance given to members. Members are advised to consult qualified specialists for information, advice and assistance on matters connected with their cars at all times.

Back
Top