Headlamp Dipping Changeover for PDLS ( Gen2 )

Author
Buddy
PCGB Member
  • Total Posts : 1946
  • Joined: 2003/09/02 23:32:46
  • Status: offline
Buddy PCGB Member
2016/06/27 13:48:18 (permalink)

Headlamp Dipping Changeover for PDLS ( Gen2 )

I've just carried out the changeover on my PDLS lamps and it's actually quite easy, the problem that the pictures are wrong in the handbook doesn't help as they show a yellow lever which is enlarged in size, and in the wrong position, the lever is quite small and is unpainted plated  metal, the T-O marks are on the right side of the case when looking inside from the rear and the photo attached of the location with the power pack moved out of position no need to disconnect any internal wiring.
 
You can see from the photo that it is quite a long way down inside the case and that it would be difficult to reach with your fingers but it does click over to the required position by just flicking it upwards to about 40 degrees from the start position.

Attached Image(s)


Kevan
Cayman Register Secretary
Cayman S Gen2 PDK Amethyst Metallic
Location South Derbyshire
PCGB R8

1 Reply Related Threads

    Buddy
    PCGB Member
    • Total Posts : 1946
    • Joined: 2003/09/02 23:32:46
    • Status: offline
    Buddy PCGB Member
    Re: Headlamp Dipping Changeover for PDLS ( Gen2 ) 2016/06/27 13:50:44 (permalink)
    And a close up with the lever in the T position file:
    post edited by Buddy - 2016/06/27 13:53:40

    Attached Image(s)


    Kevan
    Cayman Register Secretary
    Cayman S Gen2 PDK Amethyst Metallic
    Location South Derbyshire
    PCGB R8
    Guest
    Quick Reply: (Open Full Version)
      Enter the random characters shown
    Submit Post
    Jump to:

    Posts made and opinions expressed are those of the individual forum members

    Use of the Forum is subject to the Terms and Conditions

    Disclaimer

    The opinions expressed on this site are not necessarily those of the Club, who shall have no liability in respect of them or the accuracy of the content. The Club assumes no responsibility for any effects arising from errors or omissions.

    Porsche Club Great Britain gives no warranties, guarantees or assurances and makes no representations or recommendations regarding any goods or services advertised on this site. It is the responsibility of visitors to satisfy themselves that goods and/or services supplied by any advertiser are bona fide and in no instance can the Porsche Club Great Britain be held responsible.

    When responding to advertisements please ensure that you satisfy yourself of any applicable call charges on numbers not prefixed by usual "landline" STD Codes. Information can be obtained from the operator or the white pages. Before giving out ANY information regarding cars, or any other items for sale, please satisfy yourself that any potential purchaser is bona fide.

    Directors of the Board of Porsche Club GB, Club Office Staff, Register Secretaries and Regional Organisers are often requested by Club members to provide information on matters connected with their cars and other matters referred to in the Club Rules. Such information, advice and assistance provided by such persons is given in good faith and is based on the personal experience and knowledge of the individual concerned.

    Neither Porsche Club GB, nor any of the aforementioned, shall be under any liability in respect of any such information, advice or assistance given to members. Members are advised to consult qualified specialists for information, advice and assistance on matters connected with their cars at all times.

    © 2017 APG vNext Commercial Version 4.6
    Porsche
    Lockton
    Silverstone Auctions
    Swissvax
    Pirelli
    Oracle Finance
    Archant Dialogue
    Pirelli

    Cornbury House
    Cotswold Business Village
    London Road
    Moreton-in-Marsh
    Gloucestershire  GL56 0JQ

    Call us: 01608 652 911