Menu toggle

Porsche 944 Turbo Restoration - Picture Heavy

Kongsodoken

Kongsodoken

Member
The car from the outside looks like....
AutoDetox_944turbo-28.jpg
Now the Horror story the side looks like
012_zps1785ed53.jpg
Someone has cut and welded a panel after an accident so I'm removing the botched panels and replacing with new OEM panels and cleaning...repainting....and protecting the boot area including all new carpets etc
 
When possible I have decided to stay original but at times I think a few mods are necessary to this end I decided the Porsche battery tray was a pain it prevents proper corrosion protection so I have cut it out and designed my own bolt in version which was laser cut and welded this was then plated for corrosion protection and will go to powder coat this week to make it look original
003_zpsc52e8e88.jpg
 
Ken you mentalist! My effort in this respect were limited to fitting a new hatch lock grommet and what an absolute b*stard of a job it is! Probably not possible without Vaseline and needle nosed pliers. You will actually have a new car soon. [:D]
 
I'm spending more time on this forum now so I guess it is only right that I continue my re-build thread over here if anyone wants to read the early part then it's here

http://forums.tipec.net/viewtopic.php?f=25&t=11696&start=315

I have No car maintenance experience and I apologise in advance for the excess of pictures but X factor and Strictly are doing my head in so I have to do something to keep sane.....

Seeing the pictures of the boot area on Hairyarses car I decided to make mine look just as good, the boot area on my car is not so good with evidence of a botched accident repair I set to work stripping everything out.....the rear lock always bugged me as the paint is scratched on the barrel

008_zps049c1b4f.jpg



Took it apart and powder coated the holder and cleaned and lubricated

004_zps865824e5.jpg


Whilst I was at it I plated all the lock components the rear lights looked a bit oxidised so I plated all the terminals and the backing plates

001_zpsfd00e195.jpg


I can repair to as new standard I will ...if not then I buy new.........
 
Cheers Simon[:D] I do however need a little bit of help from a forum member...... Can someone with a 91 turbo se photograph the options label in boot as I want to re-create one, I have the info from the log book which relates to my car but want to get the correct text and layout etc
 
It will be identical to the label on page three of your service book (assuming that both labels were stuck in their respective places).
 
Hi mate , your 944 looks fantastic ! I have a late 1991 Turbo Shell on offer and if you check the thread under items for sale ? The very last pictures shows the sticker that I think you are asking over ? http://www.porscheclubgbforum.com/tm.asp?m=792770 Loving the Janspeed ;)
 
Fantastic! That battery tray is a pain. I stopped short of cutting mine out and welding it back in when I did the rear quarter and I regret it now!
 
ORIGINAL: robdimond Fantastic! That battery tray is a pain. I stopped short of cutting mine out and welding it back in when I did the rear quarter and I regret it now!
Click to expand...
I think it will work well[:)]....I allways make 2 just in case! so if anyone wants to go to the trouble of fitting one I have a spare not plated not powdercoated just need to cover the postage[:)]
 
mate that is tidy! don't really like black rims but those are so shiny they work! love it! ps are you plating and coating yourself? if not how much does getting little things done cost?
 
ORIGINAL: strath44 mate that is tidy! don't really like black rims but those are so shiny they work! love it! ps are you plating and coating yourself? if not how much does getting little things done cost?
Click to expand...
Powder coating is done buy a friend who owns a coating company so it's free Plating prices vary so much I use Derby plating min charge is £35 but I have had a bill for £300 ...they polish the parts before plating so the finish is allways spot, and they do it in 5 days as they only do classic cars I trust them all be it at a cost! I also rate surfaceprocessing limited they strip and electophetically (excuse spelling) prime parts. They are doing all my replacement panels which will be welded in shortly[:)]
 
Id be interested in the tray Ken, if its still available? Mine is poor, but I havent investigated too far for fear of finding out...
 
Some idiot had cut and welded panels in the back, see the cut through the latch mounting surface and under all that seam sealer was a 5mm gap where the panels had not been aligned correctly
011_zps5262864c.jpg
Never done any body work before but, I guess I can do a better job than the guy who did this repair so I purchased a spot weld drill on ebay and had a go[:)] All the bodged panels now removed
013_zpsb158f40e.jpg
Some of panels I need are No longer available from Porsche so I purchased a rear end from the scrap yard drilled out the bit I need then stripped and E-primed
003_zpse4264197.jpg
I came really nice[:)] My new Porsche panels next to my refurbished one,
004_zps619014c6.jpg
Going to get a expert to help me weld it back in
 
FINALLY got my car back new panels all welded in I will start the prep for paint next week
016_zpsb3ebf601.jpg
with the battery tray removed all the rust can be easily sorted [:)] i just need to coat in epoxy for that extra bit of protection new battery support bracket welded in
020_zps4145bd72.jpg
And with the tray in position[:)]
022_zpsc7b5c93d.jpg
Simon yours is back from powdercoating and I'll post it Monday
 
Looks fantastic Ken. That rear quarter well is really, really clean and I do know what a grotty one looks like!
 
Started the tear down today
054_zps335ff652.jpg
there are 2 vac lines that are blocked off visible in the picture above is this because of the MBC thats fitted?
 
ORIGINAL: Kongsodoken there are 2 vac lines that are blocked off visible in the picture above is this because of the MBC thats fitted?
Click to expand...
Yes, those lines would have gone to the cycling valve (CV) which has been deleted and the MBC now controls boost instead. The CV is an electronic valve that opens and closes upon instruction from the KLR computer which controls boost
 
ORIGINAL: Diver944
ORIGINAL: Kongsodoken there are 2 vac lines that are blocked off visible in the picture above is this because of the MBC thats fitted?
Click to expand...
Yes, those lines would have gone to the cycling valve (CV) which has been deleted and the MBC now controls boost instead. The CV is an electronic valve that opens and closes upon instruction from the KLR computer which controls boost
Click to expand...
Thanks[:)] If I re-instate the cycling valve do I only loose boost at the top end of the rev range? will it be OK with my tial wastegate? will re-mapping be able to minimise the loss of boost? I want it mainly stock, but want to update any weak points
 
You must log in or register to reply here.

Posts made and opinions expressed are those of the individual forum members

Use of the Forum is subject to the Terms and Conditions

Disclaimer

The opinions expressed on this site are not necessarily those of the Club, who shall have no liability in respect of them or the accuracy of the content. The Club assumes no responsibility for any effects arising from errors or omissions.

Porsche Club Great Britain gives no warranties, guarantees or assurances and makes no representations or recommendations regarding any goods or services advertised on this site. It is the responsibility of visitors to satisfy themselves that goods and/or services supplied by any advertiser are bona fide and in no instance can the Porsche Club Great Britain be held responsible.

When responding to advertisements please ensure that you satisfy yourself of any applicable call charges on numbers not prefixed by usual "landline" STD Codes. Information can be obtained from the operator or the white pages. Before giving out ANY information regarding cars, or any other items for sale, please satisfy yourself that any potential purchaser is bona fide.

Directors of the Board of Porsche Club GB, Club Office Staff, Register Secretaries and Regional Organisers are often requested by Club members to provide information on matters connected with their cars and other matters referred to in the Club Rules. Such information, advice and assistance provided by such persons is given in good faith and is based on the personal experience and knowledge of the individual concerned.

Neither Porsche Club GB, nor any of the aforementioned, shall be under any liability in respect of any such information, advice or assistance given to members. Members are advised to consult qualified specialists for information, advice and assistance on matters connected with their cars at all times.

Porsche
Lockton
Pirelli
Officially approved
Oracle Finance
WEX Esso
Collecting Cars
Archant Dialogue
Back
Top